FieldSense 2.0
3
Audio recording
indicator
Microphone opening
alongside lens with
Gore-Tex® moisture
protection.
•
Once the FieldSENSE is switched on the cumulative exposure from all sources present are stored
as Maximum, E and H percentages together with the associated date and time.
•
The values are a percentage of the associated exposure guideline power density, either
referenced to E or H field.
•
Accessing these values and synchronizing the date/time of the
•
The
FieldSENSE 2.0
can also capture voice notes which are paired with the measured data.
•
Once the device is on, double tap the power button and the Audio re- cording LED will illuminate.
•
Speak directly into the front of the device slowly and clearly for best performance.
•
A single press of the button will end the audio recording.
•
Voice notes can be downloaded from the FieldSENSE using the program available from
Fall detection & alarm
•
The FieldSENSE 2.0 is equipped with a 3-axis accelerometer which is able to detect if the device
experiences a fall.
•
This is immediately active when the device is switched on, and should the device detect a fall of
approximately 2m it will sound an alarm
•
The alarm can only be cleared by switching the device off again.
•
The goal of this is to immediately draw attention to a climber who may have fallen and may be
unconscious.
•
The alarm, if uncleared, will continue until the batteries are exhausted.
