Elma Instruments DT171, User Manual, Page: 14 / 16

Elma DT171 side 14
Replace/Insert the battery into the battery compartment observing the right polarity. The
two displays briefly light up for control purposes(alternating, green, yellow, green).
Slide the data logger back into the casing until it snaps into place. Now the data logger is
ready for programing.
NOTE:
Leaving the model plugged into the USB port for longer than necessary will cause some of
the battery capacity to be lost.
WARNING: Handle lithium batteries carefully, observe warnings on battery casing. Dispose
of in accordance with local regulations.
1
2
3
4