Elma Instruments 6100EVSE, Manual

Page: 20 / 24

Elma 6100EVSE 20
Operation
NOTES : Read and understand all Warning and Caution statements in this manual prior to using
this meter. Set the function select switch to the OFF position when the meter is not in use.
Measurements
1. For AC DC Voltage
–
Frequency, Duty Cycle
–
EVSE-CP/ Hz
–
Resistance
–
Continuity
–
diode, and capacity measurement.
Insert the red test lead to the re
d + ” VΩHz%..
terminal, and the black to the black
– ”COM”
terminal. Connect the test leads, with good contact, in parallel to the circuit under test.
Measure settings Measuring of Func. switch *Mode Display
1a DC- Voltage ± 0
DC V or m V
1b
AC- Voltage 0 AC V
Frequency 1 Hz
Duty Cycle 2 %
Resistance
Ω
CAP 0
Ω or MΩ or KΩ
1a. Notices the polarity when measuring DC., red to + and black to Com.
1c Continuity
Ω
CAP 1
Ω and
1c. Notices for Continuity tests, if the resistance is < 50
Ω, a tone will sound
1d Diode
Ω
CAP 2 and V
1d . Touch the test probes to the diode under test. Forward voltage will indicate 0.4V to 0.7V.
Reverse polarity
will indicate “
OL
”. The diode is OK
Shorted diode will indicate near 0 mV and an open diode
will indicate “
OL
” in both polarities.