Increasing the Disc Repair Time
(for more heavily scratched discs)
Pressing “
START
” button during the disc repair extends the repair time.
Each "press" of the start
button doubles the repair time.
The first time you press the START button, the repair time increases by
30 seconds
.
The second time you press the START button, the repair time increases by an
additional
1
minutes
.
(Before extending repair
time)
(After pressing START
Button once)
(After pressing START
Button twice)
Cleaning the Pads
The LCD will display a “Clean Pads” message after every 20-minutes of disc repairs.
Exchange the pads for a clean dry pair and
press any button on the Operation Panel to clear the
message
.
Rinse used pads with warm water.
Squeeze the pads several times to help remove any polish.
Once no more polish comes out of the pads, squeeze the pads again to remove extra water. At this point,
you can either re-install them on the machine, or let them air dry overnight
.
Each set of pads is good for
4
00 minutes of disc repair.
16
Revision
#
v
8.
2
.20
22
It is imperative the pads are cleaned when this message appears, otherwise you risk damage
to the discs you are repairing.