For Software release DMG version 2+ has the option of a 3 digit display and programming PCB.
With this option the user can set: and view the merge modes and other parameters.
Ÿ
HTP
Ÿ
Append - (additional set / view option) Input B’s start channel
Ÿ
Backup - (additional view option) the current input (A or B) that’s being sent
Ÿ
LoTP
Ÿ
LTP - (additional view option) the current input (A or B) that’s being sent
Ÿ
Bri - Adjust the display’s brightness setting (10 steps)
On start up the current mode is displayed. If the current mode is "append", press the SELECT
button to toggle between displaying the mode or B's appended start channel. If the current mode is
"backup", press the SELECT button to toggle between the mode type and the current input selected (i.e.
input A or B). To adjust the brightness select the "bri" selection and press and hold GO. Press the GO or
SELECT buttons to increase or decrease the brightness. The unit will resume with the new setting after a
few seconds.
To change the mode press and hold the SELECT button until the display blinks then press the
select button to scroll through the options. To execute the new mode, press and hold the GO button. The
new mode is immediate and will be recalled on start up or power up. For the Append mode a second
display will appear allowing you to set input B's start channel. Once the channel is set press and hold the
GO
butto
n to
exec
ute
the
chan
ge.
DMX 2X1 / 3X1 MERGER USER GUIDE
Pg 3
ELM Video
Technology,
Inc.
DMG_User_Guide.lwp V2.10
Http://elmvideotechnology.com
copyright
©
2009 - 2013 ELM Video Technology, Inc.
