22
CONSOLLE ID 10
ACTION DELAYED COM-E: TXA/RXA/PRES.
SIREN FAULT
SIREN EXCL/SILEN COM-J: TXF/PRES.
5
OPERATION
In normal operation conditions, the same information appears on the display as on control panel;
on the first line of the display, there is shown information typical of FKP500 Consolle such as the
address and control character of call from control panel.
During normal operation and according to the control panel status, the four first rows shown as
indicate:
Where
ACTION DELAYED means that in control panel is active a delay of the activation
SIREN FAULT indicates that the siren output of the control panel is in fault condition
SIREN EXCL/SILEN means that the siren output of the control panel is excluded or silenced
COM-
E these are the indications of the type “E” alarm transmission routing equipment
COM-
J these are the indications of the type “J” fault transmission routing equipment
o
TX becomes TXA/F indicates that an alarm/fault message has been sent from the
control panel
o
RX becomes RXA means that an alarm received confirmation has been received from
the control panel
o
PRES/ESCL indicates the presence or exclusion of the routing equipment.
CONSOLLE ID 10
FIRE PREVENTION SYSTEM
19/06/08 11:50
FAP54-04
Panel address
Master Control Panel
