4 / 4
AirMD-100L
AirKey/W AirKey/B
Technical parameters
Power supply
Battery power:
Battery life by frequency *:
1x 10 minutes
1x 60 minutes
1x 12 hours
1x 24 hours
Setting
Alarm Detection:
Battery status view:
Indication
- blue LED:
Programming:
Detection angle:
Detection distance:
Recommended working height:
Communication
Protocol:
Transmitter frequency:
Range in open space:
Protocol:
Transmitter frequency:
Range in open space:
Transmission power (max.):
Other parameters
Working temperature:
Storage temperature:
Operating position:
Mounting:
Protection degree:
Color:
Dimension:
Weight:
battery 2x 1.5V AA
1.4 year
2 years
2 years
2 years
message to the server, audible alarm
only when the battery is powered by a message on the server
motion detected
DIP Switch 3
105°
max. 12 m
max. 2.2 m
iNELS RF Control
868 MHz
up to 100m
LoRa
868 MHz
Approx. 10 km**
25 mW / 14 dBm
0…+50°C (Pay attention to the operating
temperature of batteries)
-30…+70°C
vertical
glue / screws
IP20
white
46 x 105 x 43 mm
62 g (without battery)
* Values are calculated without activating the alarm, which is energy intensive
** Depending on network coverage
Warning
Read the operating instructions before installing the device and putting it into opera-
tion. Instruction manual is designated for mounting and also for user of the device. It is
always a part of its packing. Installation and connection can be carried out only by a per-
son with adequate professional qualifi cation upon understanding this instruction man-
ual and functions of the device, and while observing all valid regulations. Trouble-free
function of the device also depends on transportation, storing and handling. In case you
notice any sign of damage, deformation, malfunction or missing part, do not install this
device and return it to its seller. It is necessary to treat this product and its parts as elec-
tronic waste after its lifetime is terminated. Before starting installation, make sure that all
wires, connected parts or terminals are de-energized. While mounting and servicing ob-
serve safety regulations, norms, directives and professional, and export regulations for
working with electrical devices. Do not touch parts of the device that are energized – life
threat. To ensure the transmission of the radio signal, make sure that the devices in the
building where the installation is installed are correctly located. Unless otherwise stated,
the devices are not intended for installation in outdoor and damp areas, they must not
be installed in metal switchboards or in plastic cabinets with metal doors - this prevents
transmission of the radio frequency signal. iNELS Air is not recommended for control-
ling life-saving instruments or for controlling hazardous devices such as pumps, heaters
without thermostat, lifts, hoists, etc. - radio frequency transmission may be overshad-
owed by obstruction, interference, transmitter battery may be discharged etc., thereby
disabling the remote control.
Supply voltage:
Transmission indication:
Number of buttons:
Communication
Protocol:
Transmitter frequency:
Range in open space:
Signal transmission method:
Other parameters
Operating temperature:
Operating position:
Color:
Protection:
Contamination degree:
Dimensions:
Weight:
3 V battery CR 2032
red LED
4
iNELS RF Control RFIO
868 MHz
up to 100 m
unidirectionally addressed message
-10 ... +50 °C
any
white black
IP20
2
64 x 25 x 10 mm
10 g (without battery)
The company ELKO EP, as the manufacturer, is entitled to make technical modifi cations to the product, in the technical specifi cation and product manual, without prior notifi cation.
