AirWD-101S
AirWD-101L
AirWD-101NB
3 / 3
power supply (external or battery), reset unit
start unit ok
opening the cover
non contact / contact magnet
test, cancel, „long press“
setting mode (signaling of measurement / pulses)
sending / receiving data
it is necessary to disconnect the power supply (external or battery), after 60 seconds after the LED goes out, insert the battery
the battery may be discharged
a discharged battery or a damaged product
Device states
x
Search availability BTS
error MAC / error MODULU / error SIM
Unit initialization
Start
Search for BTS * 2)
SIM ERR *2)
ERR *2)
Successful network connection * 2)
Measurement
Tamper
Magnet
SET button short press (> 2s)
SET button longer press (> 2s / <5s)
Communication
Communication
Other known states
Does not respond to the SET button
The unit is still in reset
The unit does not respond even after
removal insert the battery
Indication
3 x R + G blinks
2 x fl ashes R (2xR _ 2xR _ ...)
5 x fl ashes R (repeatedly)
1 x fl ashes R
without indication
3 x fl ashes G
1 x fl ashes G
2 x fl ashes G
1 x fl ashes R
any LED lights
still indicates start
without indication
When the tamper is pressed, the LED is turned off !
Note:
R... LED red
G... LED green
* 1) Indicates only when you press SET> 2 s (setting mode)
* 2) Planned
Connection to the network
SIM Error - cannot be loaded (SIM
card insertion and rotation check) / or
NB-IoT MODULE error
