Place handle assembly through side hole in sink.
Secure handle assembly with washer (1) and nut
(2). Make sure that the slot on nut is facing up.
Make sure handle is facing forward and it swings
equally in both directions.
Shut off water supplies. Place spout through
mounting hole in sink. Secure spout with rubber
washer (1), metal washer (2) and nut (3).
Push diverter connector (1) all the way up until
completely seated onto tube (2). Slide clip (3) into
diverter holes (4) to secure unit.
1
4
2
Insert hose guide (1) through the sink hole. From
underneath sink, secure hose guide (1) by screwing
mounting nut (2). Do not overtighten.
3
1
2
WARNING: Please carefully read and properly follow the instructions for installation found in this manual.
3-Ø1 3/8" (Ø35mm)
3
1
2
STEPS:
2
1
