(630) 574-8484
13
Elkay Manufacturing Company
Installation Manual (2000000350 Rev. A - 08/21)
In-Wall Filtered Water Dispenser
5. Thread the strainer into the drain adapter.
Needle-nose pliers can be used to turn the drain
adapter. Tighten the connection to create a watertight
seal. The drain adapter must be facing to the left.
Note:
Twisting the strainer instead of the drain adapter
can compromise the seal created by the plumber's
putty.
6.
Attach one end of the 3/4 inch flexible drain hose to
the 3/4 inch barbed drain adapter connection using the
supplied hose clamp. The supplied flexible drain is 13
inches long. If a longer drain hose is required, it must
be installer-supplied.
7. Place the drain basin back into the water dispenser
and reinstall the two screws.
8.
Route the drain hose through the filter box and attach
the other end to the p-trap drain adapter using a hose
clamp. The drain adapter is designed to be glued into
a 1-1/4 inch PVC pipe.
Shown with Filter box
9. Connect the drain adapter into the household waste
drain pipe.
If the p-trap is located inside a sealed walled, it must
have permanently-glued joints. If the p-trap is in an
accessible location, a standard non-glued p-trap is
acceptable.
Note:
Always consult local plumbing codes prior to
installation.
10. Install metal grate cover. Do not install the drip tray
since the unit is plumbed into the household waste
line.
11. Installing the
Filter
a.
First, write the current date on the filter in the space
provided.
b.
Attach the filter cartridge to the filter head by
inserting firmly into the filter head, turning clockwise
to install so the label is facing downward.
Continue to start up instructions.
