Elkay ezH2O LBWD06BKK Installation Manual Download Page 4

Elkay Manufacturing Company 

(630) 574-8484 

In-Wall Filtered Water Dispenser 

 

Installation Manual (1000005232 Rev. D - 08/21)

1.3  Serial Number Location

Please locate the serial number located under the 

front panel, as shown and use this serial number when 

contacting us with questions concerning the installation of 

this product.

1.4  Contact Information

General Information 

Elkay Manufacturing Company 

1333 Butterfield Rd.

 

Suite 200  

Downers Grove, IL 60515
Phone: 630.574.8484 

Email: [email protected] 

Website: http://www.elkay.com

USA/Canada Customer Care  

Phone: 800.476.4106  

Phone: 800.260.6640 (Repair Service) 

Email: [email protected]

International Customer Care  

Phone: 630.575.4755 

Email: [email protected]

Installation Services 

Phone: 800.952.8064 

Email: [email protected]  

Website: http://www.elkay.com/contact-us/install 

1.5  Disclaimer

The information contained in this manual is given free of 

charge. This information is based on reliable technical 

data and is intended for people with the technical 

knowledge to install, use, and maintain this product 

at their own discretion and risk. Elkay assumes no 

responsibility for results obtained or damage incurred 

from the use of this material either in whole or in part by 

the buyer.

1.6  Notice of Changes

The information, specifications, and illustrations in this 

manual are based on the information that was available 

at the time this material was written and can change at 

any time.

Dimensions are given in inches (") and millimeters (mm).

1.7  Radio Frequency Compliance

The water dispenser and filter communicate with each 

other through a Near Field Communication (NFC) device 

This short-range, wireless connectivity technology is 

designed to monitor the status of the filter and to alert 

the user when it is time to change the filter. This device 

complies with part 15 of the FCC Rules.

Operation is subject to the following two (2) conditions: 

(1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, 

including interference that may cause undesired 

operation.

Changes or modifications not approved by the 

manufacturer could void the user’s authority to operate 

the equipment.
This device complies with Industry Canada licence-

exempt RSS standard(s). Operation is subject to the 

following two conditions: (1) this device may not cause 

interference, and (2) this device must accept any 

interference, including interference that may cause 

undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie 
Canada applicables aux appareils radio exempts de 

license. L’exploitation est autorisée aux deux conditions 

suivantes: (1) l’appareil ne doit pas produire de 

brouillage, et (2) l’utilisateur de l’appareil doit accepter 

tout brouillage radioélectrique subi, même si le brouillage 

est susceptible d’en compromettre le fonctionnement.
This equipment complies with FCC radiation exposure 

limits set forth for an uncontrolled environment. The user 

should avoid prolonged exposure within 20 cm of the 

antenna, which may exceed the FCC radio frequency 

exposure limits.

1.8  Warranty

This product is covered by a Limited Warranty and Elkay 

will not be held responsible for damage of any kind in 

connection with the installation of the product or http://

www.elkay.com/warranty and click on drinking water 

products.

1.9  Definitions

DANGER - Indicates death or serious injury will result if 

proper precautions are not taken.

WARNING - Indicates death, serious injury or property 

damage can result if proper precautions are not taken.

CAUTION - Indicates some injury or property damage 

may result if proper precautions are not taken.

Authorized Service Personnel

 – Factory trained 

personnel or personnel having working knowledge 

of electrical, plumbing and machine (appliance) 

maintenance procedures.

Summary of Contents for ezH2O LBWD06BKK




















Reviews: