0000001496 (Rev. F - 08/17)
Page 5
EMASM*A
Plumbing Connections
•
Ensure lines and ports remain clean and free of contaminants during assembly.
•
Purge each component if necessary.
•
To ensure quick-connect connections seal properly, follow instructions per Figure 2, Page 2.
Instruction for Use
1.
Place container under the dispenser nozzle
and depress the actuator button. Hold until container is filled to the level
desired.
2.
To stop water flow, release actuator button
. Pull container away from dispenser nozzle.
1.
Connect water supply line to unit:
2.
Connect the 3/8"O.D. Copper tube
from the in-line strainer to the 3/8" to the Service Stop Valve.
3.
Connect the 1-1/4"O.D. Drain Tray Outlet
to the in-wall Drain Line using a Slip Joint Drain Union or compression clamp
(not supplied). Tighten all connections water tight.
4.
Turn water supply on,
inspect for leaks and correct any leaks before continuing.
Connect Plumbing Lines
PRINTED IN U.S.A.
FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.834.4816
ELKAY MANUFACTURING COMPANY • 2222 CAMDEN COURT • OAK BROOK, IL 60523 • 630.574.8484 • www.elkay.com
REPAIR SERVICE INFORMATION TOLL FREE NUMBER 1.800.260.6640
DESCRIPTION
1000001673
98546C
1.0 GPM REGULATOR KIT- EMASM
AERATOR KIT
REPLACEMENT PARTS
PART NO.
REGULATOR
AERATOR