97565C (Rev. J - 8/07)
EDFP210FP*B EDFP214FP*B EDFP217FP*B
1. Wall should already be framed for the fountains using dimensions shown in Fig. 3.
Shown dimensions pertain to installation location.
These dimensions are required for compliance with
ANSI S
tandard
A1
17.1. and
ADA
(Framing shown for reference only).
2. Remove bottom covers from fountains and save the screws.
3. Inst
all the fount
ains
using bolt
s and washers (not provided).
T
ighten securely
.
4. Attach drain tubes
to fountains and cut to required length using the freeze resistant boxes as guides.
5. Install freeze-resistant boxes
- see box instructions.
6. Replace
bottom covers.
FIG
. 4
FINISHED FLOOR
PAGE 5
EDFP217FP
ROUGH-IN DRA
WINGS
