ELK-P1215 / P1215K Installation Manual
Page 1
ELK-P1215 / P1215K
Power Supply /
Battery Charger Kit
For the latest downloadable version of this manual, visit our website: http://www.elkproducts.com
Installation and Setup Guide
APPLICATION
The ELK-P1215 Power Supply/Battery Charger Kit is a plug-in14VDC
Power Supply (ELK-P1417) combined with an intelligent Charger
Board (ELK-P1215CB). It can supply up to 1.5 Amps of current
at 12VDC (nominal). The charger board features a Low Battery
Supervision output, Low Battery Cutoff, as well as a Manual On/
Off switch. The Power Supply features built-in overload reset and
screw terminals for connections. The ELK-P1215K kit includes an
ELK-1250 5Ah Battery.
SPECIFICATIONS
ELK-P1417
Plug-in power supply with receptacle mounting bracket
• Input Voltage Range: 100 - 240 Volts AC, 50/60Hz
• Input Current: 0.8 Amps AC
• Output Voltage Range: 13.8 to 14 Volts DC.
• Continuous Output Current: 1.7 Amps DC
• Complies with UL 60950
• Compliant with Energy Star EISA Level V
• RoHS compliant (RoHS2-2011/65/EU)
• Size w/ mounting bracket: 3.07" x 2.83" x 1.5" (78 x 72 x 38 mm)
• AC input plug style: NEMA 1-15P (non-polarized)
• Positive and Negative screw terminals on DC output
ELK-P1215CB
• Power Supply Input: 14 Volts DC provided by ELK-P1417
• Continuous Output Current: 1.5 Amps. **
• Low Battery Trouble: 11 Volts. (nominal)
• Low Battery Cutoff: 9 Volts. (nominal)
• PC Board Size: 2.25" X 2.5" (57.15mm X 63.5mm )
• Standby Battery Charging Capacity: 1 to 12 Ah, Sealed Lead Acid
• Battery Wire Length: 16" with F1-Faston No. 187 Receptacles
• Master Power Switch turns On/Off the DC Input and Battery
• Operating Temp: 32° to +120° degrees F
• Humidity: 95% RH (max.), non-condensing
** Higher output current (up to 2.5 Amps) may be drawn for a short
time provided a fully charged battery is connected.
AVAILABLE PART NUMBERS/CONTENTS
ELK-P1215
Power Supply/Charger Kit
(pictured above)
ELK-P1417 Plug-in Power Supply
ELK-P1215CB
Circuit
Board
ELK-P1215K
Power Supply/Charger Kit & Battery
(pictured below)
ELK-P1417 Plug-in Power Supply
ELK-P1215CB
Circuit
Board
ELK-1250 12V, 5Ah Battery
ELK-P1417
Plug-in Power Supply ONLY, 14VDC @ 1.7A
ELK-P1215
Features or Specifications subject to change without notice.
800-797-9355
www.elkproducts.com
email: [email protected]
PO Box 100 • Hildebran, NC 28637
• USA
FEATURES
• Auto-Resetting Overload Protection
• Built-In Battery Charging Circuit
• Low Battery Trouble Output
• Low Battery Deep Discharge Cutoff Protection
• Master Power Switch
• Lifetime Limited Warranty
* ELK Batteries carry a
Two Year Warranty
ELK-P1417
ELK-P1215CB
ELK-P1215K
ELK-P1417
ELK-P1215CB
ELK-1250
