Assembly Instructions:
1.
Place whiteboard face down on a table
2.
Position Whiteboard Frame arms in position over pre-drilled holes in
frame and affix in place using the 8 x 10mm whiteboard screws
3.
Turn whiteboard over
4.
Position shelf in place aligned with edge of whiteboard
5.
Affix shelf using the 4 x 15mm shelf screws
6.
Screw the 2 x lockable castors into the base of the legs at the front
7.
Screw the 2 x free-rolling castors into the base of the legs at the back
8.
Fully insert legs into the frame channels on the back of the whiteboard
ensuring they are angled as shown in the diagram
9.
Insert pop-pins into nut on the back of the whiteboard frame and locate
into holes in legs
10.
Move the easel into an upright position
11.
Release the pop-pins. Raise the whiteboard to the desired position and
allow the pop-pins to locate into the appropriate hole. Lock in place by
tightening the locking nuts above.
