Installation
2.2 Video Settings
After setting the OSD you may set up the video settings.
How to set up the video functions:
▪
To move between the different options press the up or
down button (7).
▪
To select a setting press the OK button (10).
▪
To change the value press the left or right button (8).
▪
Values you can set up:
›
Digital TV:
Here you can select between display,
picture format, mode, brightness, colour
saturation, sharpness and RGB/Yuv display.
›
Analog TV:
You can select between display,
picture format, mode, brightness, contrast,
colour saturation, colour shade, sharpness and
the amplitude.
›
SDI Video:
You can select between the output
format HD and SD and switch 656 on or off (only if
SDI is available).
▪
To save the adjustment of the video settings press the
Exit button (9).
▪
To leave the video settings press the Exit button (9) again.
7