1
Airframe Assembly
First, apply hot melt adhesive to the joining areas of
the rear wings (Part #6).
After that, use foam safe glue to join the front wing (Part
#5) and rear wing together. Allow them to dry.
Locate the two fuselage halves. Use foam safe glue to join
them together. Wait for at least 3-5 minute until the glue
has cured.
The fuselage has locking tabs that match slots on the wing.
By sliding the fuselage onto the wing, carefully align and
test-fit the fuselage with the wing. When proper positioned,
the fuselage should end near the motor opening on the
wing.
After the fuselage has been test-fit with the wing, use hot
melt glue to secure the fuselage onto the wing.
Locate Part #7 and Part #8. Use the blade to cut the inner
frame out of the pre-cut plate.
