Aileron Control Horn Installation.
Secure the white control horn on the aileron
with two M2.5*16mm self-tapping screws.
Connect control horn clip to the servo on the
aileron. Clip the control horn into the control
horn clip.
Elevator Installation.
Use some foam safe glue to secure the
elevator into the pro-cut slots on the tail of
fuselage.
Elevator Control Horn Installation.
Secure the white control horn on the elevator
with two M2.5*16mm self-tapping screws.
Connect control horn clip wire to the servo on
the elevator. Clip the control horn into the
control horn clip.
Rudder Installation.
Apply foam safe glue to three slots on the tail
of fuselage. Insert three rudder connectors
into the pre-cut slot on the rudder.
