Installing the Card
Before The Basic Procedure
To install a VGA Card on the mainboard you need to
notice the following items.
J
Unplug after switch off power.
M
Make sure your hands dry
J
Do not touch other parts inside computer when using
"Screw driver"
J
Hold insulated part when you take the interface card
J
Circuit Short is caused by user's rashness when leaving
screws inside computers.
The Basic procedure of the installation
In supported CD, we have a video that teach you how
to operate the card, the steps as it follows,
1. Power off the computer and monitor. Disconnect the
monitor cable form the back of your computer and
remove the computer cover with screw driver.
2. If there is an existing graghics card, unscrew it from
chassis and rock it gently from end to end then pull it
straight up to remove it.
-10-
