(1) The status bar on top of the page shows the product model, time, Bluetooth status
and record status.
①
Model numbers varies depending on the product models.
②
Bluetooth not connect; Bluetooth connected.
③
During operation, appear when temperature exceeds the upper alarm limit,
and appear when temperature below the lower alarm limit.
④
Record: close means no data is recorded. Record: Open means that data is
being recorded.
(2) The middle part of the page is the sub-interface button.
①
: Real-time measurement interface
②
: Graph
③
: Vacuum parameter setting
④
: System parameter display and setting
(3) The bottom part is the “Start” and “Stop” button. The motor is off by default after
power-on. Click “Start” to start the motor. Button will be locked (within 3 sec);
Click “Stop” to stop the motor. Button will be locked (within 10 sec).
After the motor stops, in order to prevent frequent start and stop, the button is
invalid within 10 seconds.
When the motor starts, the solenoid valve automatically opens instantly. The
solenoid valve closes automatically after the motor stops to avoid the oil be suck to
vacuum sensor.
1. Real time measurement interface
Click the“Measure” button on the main interface to enter the real-time measurement
interface.
-5-
