Pull-Out Pantry
Installation Instructions
for 400MM and 450mm width cupboards
Step Four – Fix Frame to Cabinet Door
Fix each T-Bar (A) to Door with 6 x ST4*14 Pan Head Screws. Position T-
Bars as per diagram
Fix 2 x M6*15 Hex Bolts onto Top T-Bar and Bottom T-Bar as per diagram
Slide T-Bars (A) into frame until the Hex Bolt heads are visible and
aligned with the side holes of Frame
Fix a M6*15 Hex Bolt (B) through the middle side hole of Frame for the
Top and Bottom T-Bar (you may need a friend to hold the door steady)
In the next step you can adjust the door position to align with cabinet
Fix T-Bars to Door
1
Line of
inside of
cabinet
Door
Ce
nt
re
li
ne
32mm
81mm
Insert T-Bars into Frame
2
Screw 2 x
M6*15 into
left and
right holes
of each
T-Bar
Insert T-Bars
into Frame and
then screw
1 x M6*15 (B)
into middle
hole of Top and
Bottom Frame
into each T-Bar
3
4
The T-Bars should
have 2 x M6*15 bolts
affixed before
inserting in the Frame.
These are used in a
later step to align the
Door
Once completed,
the left and right
bolt heads are
inside the Frame.
The middle bolt
head is outside
the Frame
A
A
A
A
B
B