www.ELITETOOLS.co
Keep Working
FORWARD/REVERSE TRIGGER SWITCH
This impact wrench is equipped with a rocker style forward/reverse switch (1) (Fig. 2).
1. To operate the impact wrench in the forward direction, press and hold the bottom part of the switch (2). The
socket will rotate in a clockwise direction to tighten the fastener.
2. To operate the impact wrench in the reverse direction, press and hold the top part of the switch (3). The socket
will rotate in a counter clockwise direction to loosen the fastener.
REMOVING FASTENERS
One of the most common uses for the impact wrench is to remove car wheel nuts for rotating the tires. Car wheel
nut removal is used for illustrative purposes.
WARNING
For safety reasons, the operator must read the sections of this Owner’s Manual entitled “GENERAL SAFETY WAR-
NINGS”, “POWER TOOL SAFETY”, “SPECIFIC SAFETY RULES”, “EXTENSION CORD SAFETY” and “SYMBOLS” before
using this impact wrench.
Verify the following every time the impact wrench is used:
1. Safety glasses and hearing protection are being worn.
2. Socket or accessory is “impact wrench” rated.
3. Socket or accessory is in good condition. Failure to observe these safety rules will significantly increase the risk
of injury.
8
Summary of Contents for IW440
Page 34: ......
