1) ELECTRIC GLASS CERAMIC HOB
The hot plates are equipped with 4 radiant heating
elements with different powers and diameters.
Cooking zones are aesily identifiables thanks to the
circles (see illustration in description) on the top;
relative powers are listed in the scheme n.1.
On the frontal panel, close to each knob, has been
silk-screened a scheme where is indicated to which
cooking zone the knob refers (fig. 1).
The scheme annexes a light indicator that turns on
when the cooking zone temperature is above 60° C
(see fig. 1).
The indicator will turn off only when the temperature
of the cooking zone will be below the value: this is
the reason why we call it residual heat indicator.
Connection of electric heating elements
Heating elements are controlled by energy
regulators with 6 positions (see fig. 1) that permit to
obtain a big range of different temperatures. In
Scheme 1, by way of information, we give
instructions to obtain different cooking levels.
To connect the heating elements is necessary to
turn clockwise or anticlockwise the relative knob.
Indicator light 11 shows the connection of one or
more heating elements.
To connect the heating elements with double
cooking zone is necessary to turn clockwise the
knob mapped in fig. 1 and stop in position "0".
To diminish from position 6 to position 2, insert one
cooking zone only.
How to use the cooking zones
Heating takes place only in the inside part of the
circles drawn on the special glass. The circles have
to be wholly covered by the pots.
6
USE
FIG. 1
