9. Inspect blower wheel for defects such
as broken or missing fins. If the blower
wheel has any defects it must be
replaced.
10. Reassemble motor assembly. Put the
base plate assembly on and tighten the
lock nuts. Slide heat slinger over the
motor shaft with the Allen key hub side
facing up.
11. Make sure the
heat slinger is set
properly so it does
not come in
contact with the
lock nut threads.
Use a 5/64” Allen key to lock the heat
slinger to the motor shaft. Spin the heat
slinger to make sure it is set properly.
12. Slide the flat plate
back over the motor
shaft with the
beveled side up to
allow for the heat
slinger to spin.
13. Slide blower wheel
over motor shaft
and set it to proper
height on the motor
shaft. Use the 1/8”
Allen key and lock
the fan onto the
motor shaft. Give
the wheel a test spin with your hand to
make sure it spins properly.
14. Line up holes in
the motor
bracket to the
threaded studs
on the SWG
housing and
reattached the
motor assembly. Make sure the
opening discharge of the heat slinger is
pointed downward.
15. Remove
appropriate
knockout from the
electrical box and
reconnect conduit.
Use wire nuts to
join the proper wires together. Place
cover back over electrical box.
16. Open the high
temperature
silicon and use it
to seal the motor
bracket
assembly where
it joins to the SWG housing.
17. Place motor
cover back over
the motor
assembly and
align the screw
holes. Secure
motor cover to the SWG housing.
18. Turn the power back on and simulate a
call for heat. Inspect SWG unit to make
sure it operating properly. Use
necessary instrumentation to ensure
proper operating conditions for your
equipment.
**Note – Fan and motor assembly should be
inspected and cleaned during annual
equipment maintenance.
Warranty:
Endeavoring Enterprises warrants that the
EN46275900
shall be free from defects for a
period of 12 Months from the date of purchase.
Labor charges are not covered as part of the limited
warranty. In no event shall Endeavoring
Enterprises be liable for any incidental or
considerable damages resulting from the use of this
product.
DISTRIBUTED
BY:
PATRIOT
SUPPLY
– 20
WEST
MALL
‐
PLAINVIEW NY
11803
– PH#
516
‐
249
‐
3100
