Elite EBL-2000G Instruction Manual Download Page 2

      IMPORTANT SAFEGUARDS 

 

READ ALL INSTRUCTIONS BEFORE USE. 
WARNING

—To avoid the risk of electrical shock, always make sure the product is 

unplugged from the electrical outlet before assembling, disassembling, relocating, 
servicing, or cleaning it.  

WARNING-To reduce the risk of fire, electric shock, or serious personal injury:

 

 

Always unplug the product from the electrical outlet before relocating, servicing, or 
cleaning it. 

 

Do not plug/unplug the product into/from the electrical outlet with a wet hand. 

 

Do not operate the product if the power cord is cut, damaged, or if the wires are 
exposed. 

 

Keep the power cord and product away from heated surfaces, including stovetops. 

 

Do not immerse in or expose the base, power cord, or plug to water or other liquids.  
Do not attempt to open any part of the base. 

 

To disconnect the product from an electrical outlet, pull directly on the plug; do not 
pull on the power cord. 

 

Do not put any stress on the power cord where it connects to the product, as the 
power cord could fray and break. 

 

If using an extension cord with this product, the marked electrical rating of the cord 
set or extension cord must be at least as great as the electrical rating of the product. 

 

Keep hands and utensils out of container while blending.  A scraper may be used 
but only when the blender is not running. 

 

Do not operate the product if it has a damaged power cord or plug, malfunctions, or 
is dropped or damaged.  This product has no user-serviceable parts.  Do not attempt 
to examine or repair this product yourself.  Only qualified service personnel should 
perform any servicing; take the product to the appliance repair shop of your choice 
for inspection and repair. 

 

CAUTION-- To reduce the risk of personal injury or product/property damage:

 

 

This product is intended for use in blending food products; do not use the product for 
any other purpose. 

 

Keep the product out of the reach of children and pets.  This product is not intended 
for use by children. 

 

Do not leave the product unattended while it is in use, especially when children are 
present.  Extra caution is necessary when using this product near children.  Always 
unplug the product from the electrical outlet when it is not in use. 

 

Do not use attachments not recommended or not sold by the manufacturer or it may 
cause risk of injury to persons.  

 

This product contains exposed sharp metal blades.  Use extreme caution when 
handling. 

 

Avoid contact with moving parts. 

 

Always operate blender with cover in place. 

 

Always operate the product on a flat, level, stable surface to avoid overturning it. 

 

Ensure the product is off before adding or removing parts.  Do not attempt to place the 
Glass jar onto the Base while the motor is running.  Do not attempt to remove the 
Glass jar from the Base while the motor is running. 

 

Correctly attach the blade assembly to the glass jar before putting the Glass jar onto 
the Base.  To reduce the risk of injury, never place cutter-assembly blades on the 
base without glass jar properly attached. 

 

After operating continuously for three minutes, wait at least one minute before 
operating the product again to help prevent the motor from overheating. 

 

Do not run motor while Glass jar is empty. 

 

This product is intended for indoor, non-commercial, non-industrial, household use 
only.  Do not use outdoors. 

 

Do not let cord hang over the edge of a table or counter. 

 

This product uses a short power cord to reduce the risk of personal injury resulting 
from becoming entangled in or tripping over a longer cord. 

 

WARNING:

  This product is equipped with a polarized plug (one blade is wider than the 

other blade) to reduce the risk of electrical shock.  This is a safety feature.  The plug will 
fit into a polarized outlet only one way.  If you are unable to insert the plug into the 
electrical outlet, try reversing the plug.  If the plug still does not fit, contact a qualified 
electrician.  Never use the plug with an extension cord unless you can fully insert the 
plug into the extension cord.  Do not alter the plug.  Do not attempt to defeat the safety 
purpose of the polarized plug. 
 

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE 

Summary of Contents for EBL-2000G

Page 1: ...nd maintenance or incorrect current or voltage Lost or missing parts of the product Parts will need to be purchased separately Damages of parts that are not electrical for example cracked or broken plastic or glass Damage from service or repair by unauthorized personnel Extended warranties purchased via a separate company or reseller Consumer s remorse is not an acceptable reason to return a produ...

Page 2: ...by children Do not leave the product unattended while it is in use especially when children are present Extra caution is necessary when using this product near children Always unplug the product from the electrical outlet when it is not in use Do not use attachments not recommended or not sold by the manufacturer or it may cause risk of injury to persons This product contains exposed sharp metal b...

Page 3: ...ity Do not over fill it CAUTION Do not use the product for mashing or grinding heavy foods e g potatoes or meats or to stir thick mixtures e g dough 4 After filling the glass jar with ingredients place the Lid with Cap securely onto the jar 5 Plug the product into a standard 110 120 volt AC electrical outlet 6 Select the desired speed setting Press HI or LO to select upper or lower speed selection...

Page 4: ...Blades and the Gasket from the Glass jar Use a small brush not included to remove particles of food lodged underneath the Blades To reassemble replace the Gasket and the Blades into the bottom of the Glass jar and then turn the Blade Base clockwise to tighten onto the Glass jar refer to the Parts illustration Store the product in a cool dry place CLEANING 1 Make sure the blender is unplugged 2 Rem...

Reviews: