background image

   CARE & MAINTENANCE 

 

WARNING

:  Always unplug the product from the electrical outlet before assembling, 

disassembling, or cleaning it. 
 

 

If the product’s motor does not run freely while blending ingredients, perform one or 
more of the following steps, as necessary: 

o

 

Press the OFF Button and add water to the ingredients 

o

 

Press the PULSE Button for a few minutes and the motor blends freely 

o

 

Press the OFF Button, unplug the blender from the electrical outlet and use 
a rubber spatula to clear the sides of the Jar and push the ingredients 
toward the Blades 

o

 

Reduce the amount of ingredients inside of the Jar 

 

Clean the product immediately after each use.  Before cleaning and putting your 
hands and fingers inside of the Jar, remove the Jar from the Motor Housing and the 
Plastic Lid, Blades and Spin Base from the Plastic Jar. 

 

Use a small toothbrush (not included) to remove particles of food lodged underneath 
the Blades.  

 

Clean the exterior surface of the Motor Housing by wiping it with a soft, damp cloth. 

 

Do not use abrasive cleaners or scouring pads to clean the product. 

 

To clean the Jar, add ¼ teaspoon of liquid soap to the Jar and fill with warm water.  
Place the Jar on the Motor Housing and press the PULSE Button several times for a 
few seconds.  Remove the Jar from the Motor Housing and rinse the Jar underneath 
running water. 

CAUTION:

  Do not place the Jar and the Plastic Lid into a dishwasher or extremely 

hot water. 

 

Dry all product parts thoroughly before storing. 

 

Store the product in a clean, dry place with the Plastic Lid removed from the Jar. 

 

 

   CLEANING 

 
1)  Make sure the blender is unplugged. 
2)  Remove the cutting unit assembly.  Handle with care, blades are sharp. 
3)  Wash the cover, jar, gasket, blades and retaining ring in hot soapy water. 
4)  Rinse and dry.   
5)  Reassemble the parts.  Store away with the cover ajar to prevent container odor. 

 

TIPS 

1)  If blending action stops at any time, immediately turn the unit OFF.  Remove the 

cover and use a rubber spatula or wooden spoon to push the mixture toward the 
blades.  Replace the cover and continue blending process. 

2)  Do not store food in the blender jar. 
3)  This blender does not mash potatoes, whip cream, mix stiff dough or grind 

meats. 

 

Summary of Contents for EBL-1000

Page 1: ...tenance or incorrect current or voltage Lost or missing parts of the product Parts will need to be purchased separately Damages of parts that are not electrical for example cracked or broken plastic or glass Damage from service or repair by unauthorized personnel Extended warranties purchased via a separate company or reseller Consumer s remorse is not an acceptable reason to return a product to o...

Page 2: ...tended for use by children Do not leave the product unattended while it is in use especially when children are present Extra caution is necessary when using this product near children Always unplug the product from the electrical outlet when it is not in use Do not use attachments not recommended or not sold by the manufacturer or it may cause risk of injury to persons This product contains expose...

Page 3: ...ng the product HOW TO USE 1 Wash the ingredients you want to blend and cut them into pieces small enough to fit into the Plastic Lid Feeding Hole 2 Once cleaned and cut add the ingredients into the blender through the Plastic Lid Feeding Hole NOTE The Jar has a six cup 48 oz 1 5 liter capacity Do not overload the Jar with ingredients 3 After filling the Jar with ingredients secure the Plastic Lid ...

Page 4: ...ft damp cloth Do not use abrasive cleaners or scouring pads to clean the product To clean the Jar add teaspoon of liquid soap to the Jar and fill with warm water Place the Jar on the Motor Housing and press the PULSE Button several times for a few seconds Remove the Jar from the Motor Housing and rinse the Jar underneath running water CAUTION Do not place the Jar and the Plastic Lid into a dishwas...

Reviews: