1.
Before using your
Digital
Air Fryer
for the first time, carefully remove all packaging material.
2.
Remove the parts from the box and wash the Pan (12) and Basket (13) with warm, soapy water
and a non-abrasive sponge.
IMPORTANT: DO NOT IMMERSE THE MAIN HOUSING IN WATER. Wipe the interior and exterior of
appliance clean with a damp cloth.
IMPORTANT: THIS IS NOT A DEEP FRYER. DO NOT FILL THE
APPLIANCE OR ITS PAN (12) WITH OIL OR FRYING FAT.
3.
Place the appliance on a flat, horizontal and stable surface
(make sure surface is heat-resistant). Place away from
walls and other appliances. Leave approximately 4 inches
of space from nearby objects. (See Figure 1)
4.
Lift the Lid Handle (3) and open
the Top Cover (9) to the position
shown in Figure 2. The Top Cover
(9) will remain open and locked
into place. Grasp Basket Handle
(5) to lift out Basket (13). (See
Figure 2)
TIP: Never place food directly into
the Pan (12). In place of using the
Basket (13), an oven-safe plate or
bowl (not included) can be placed
onto a wire rack (not included) into
the Pan (12).
1.
Make sure the Pan (12) is properly inserted into the Main
Base (10) of the unit.
2.
Place ingredients into Basket (13) and place Basket (13) into
the Pan (12). (See Figure 3)
TIP:
-Do not press the Basket Fold-Down Switch (4)
when placing the Basket (13) into the Pan (12).
-Do not fill the Basket (13) over the MAX fill position.
-If cooking food that expands, make sure the cooked
capacity will not exceed the MAX fill position.
3.
To close the Top Cover (9), hold the Lid Handle (3) with one hand
and use your other hand to push down on the Lid Release Switch
(2). Slowly lower the Top Cover (9) down until it fully closes. (See
Figure 4)
TIP: Always be sure to have a firm hold on the Lid Handle (3) before
pressing the Lid Release Switch (2). Do not allow Top Cover (9) to
forcefully drop down onto Main Base (10).
CAUTION: Do not touch the pan(12) during and immediately after
use as it gets very hot. Only hold the pan by the handles (11).
NOTE: The initial 15 minutes of use may result in minimal smell and
smoke. This is normal and harmless and comes from the protective
substance applied to the heating elements during manufacturing.
Figure 1
Figure 2
Figure 3
Figure 4
6
