WARNING
Do not
climb on framework or counter top (where present).
Do not
use a steel hammer to assemble framework, doing so may cause
damage to surface finishes or bodily injury.
Note: no specialist tools are required to assemble this product but if so
required, use a rubber or wooden mallet only.
Do not
assemble framework on a steep incline.
Do not
let rain or snow accumulate on the roof canopy.
When new, the framework assembly may be stiff. This stiffness will ease with
regular use.
When new, the framework of this product may contain loose metal filings. Be
careful when first assembling.
When new, oil residue may be present around connection points. Be careful
when first assembling.
This product is designed to withstand inclement weather conditions but it is
always recommended that additional ballast or grounding anchors be used
wherever possible. Anchoring is your responsibility. Damages caused by
poor weather conditions are not warranted.
In extreme gusty conditions it is advised that framework is disassembled
entirely.
This framework is designed for temporary use only and is not a permanent
structure.
Read this before setting up or using your Gavin Kenning Engineering Limited
product.
Improper use of this product and/or its components can cause damage to equipment or
property, serious personal injury or death.
Gavin Kenning Engineering Limited shall not be liable for any damages arising out of
the use of this product, including, but not limited to, damages for economic loss of
profits or savings, lost wages; damages to or loss of use of property; bodily injury;
medical payments; pain and suffering; and loss of consortium.
DISCLAIMER
