410-795-8368 6335 S. Carroll Park Drive, Sykesville, MD 21784
How to Take Down a Bounce
Step 1: Remove stakes from corners of the
bounce. Turn off the blower. Disconnect the
inflation tube from the blower. Open all ports
to allow air inside bounce to come out freely.
Allow 10 - 15 minutes for the bounce to
deflate. After bounce is on the ground step on
the areas that still have air in them.
Step 2: Continue to step on bounce to get the
air out. Pull all of the sides into the middle of
the bounce. You should be able to see the
seam of the bottom of the bounce. The flatter
you are able to make bounce, the easier it is to
roll it up.
Step 3: Fold in steps and inflation tubes
Step 4: Starting from the right side of the
bounce, fold the bounce approximately 1/2 of
the width of the bounce to the middle of the
bounce.
