Rev.08/11/16 -DR
www.elitescreens.com
2
2. Continue with screen material assembly seen in full Yard Master 2 Series User Guide.
3. Next, lift the screen up while simultaneously opening the frame legs. Insure the legs are locked in place
by pressing down on the hinges near the bottom center of each leg. Two people are needed for this step.
(Fig.2-3)
4. Refer to Yard Master 2 User Guide for additional steps on securing your screen.
Disassembly
1. Remove ropes and stakes from the ground, if needed, then unlatch the
hinged support bars on front side of each leg so that it is bent and fold
that half of the legs up for the next step.
2. Slowly lower the screen to the ground (towards the closed legs). Two
people are needed for this step.
3. Unlatch the hinged support bars and fold down other half of the
legs. Remove
knob screws
before proceeding.
4. Remove the
legs
from the
folding frame
and continue with
disassembly, referring to the full user guide
.
NOTE:
All other accessories, except for extension legs, are supplied with the Yard Master 2 Series when
purchased separately.
See Yard Master 2 Series User Guide for full assembly instructions of the screen.
For a local Elite Screens contact or Technical Support, please visit
www.elitescreens.com
Fig.2
Fig.3