Rev. 090618
5
ELITESCREENS.com
7. Carefully take the
center support leg (C)
out of the
carrying bag (F)
and unfold it completely.
Note: If you are planning to use the
Wraith Veil rear projection material (D)
, attach the
short center
support leg (J)
instead of the
center support leg (C).
6. Line up the correlating screw holes on the frame and legs and fasten the
knob screws
(I)
to all sections,
excluding
the back sections of the
folding legs (B)
. These are to be secure in later steps. See below.
9. Attach the
ropes and rings (G)
to each side of the legs at the top of the frame (1 at each eye and loop).
Note:
Be sure to place the legs in which the
eye loops are facing outward from the frame.
These eye loops will be utilized with the
rope
with ring (G)
to help secure your screen in
windy applications.
Note: A and B are for 180" models only.
