07142020
4
9. Next, carefully unfold the extra support leg behind the leg and attach it securely using a
knob screw (E)
.
10.
To secure the frame, place a
stake (I)
into each hole located on the frame footing, and hammer it into
the ground. Finally, tie the 4
ropes (G)
to the stakes to prevent the screen from tilting or falling over. As
shown in fig.19.
Fig.19
Screen Disassembly
1.
Remove
ropes (G) and stakes (I)
from the ground.
2.
Unlatch the hinged support bars on front side of each leg so that it is bent and fold that half of the
legs up for the next step.
3.
Slowly lower the screen to the ground (towards the closed legs).
Two people are needed for this step.
4.
Loosen and remove the ropes,
knob screws
(E) and
eyebolts (F)
from each leg.
5.
Unlatch the hinged support bars and fold down other half of legs
6.
Remove the frame
legs (B)
from the
folding frame (A).
