Rev. 20220302DT DS0169
2
WARNING
Individual modifications to this product are prohibited and will void the manufacturer’s warranty. Please contact
the Elite Screens Customer Service Team with any questions.
NOTE
:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules.
The product settings are designed to provide reasonable protection against any radio interference within a
residential installation. If properly installed, the Evanesce Tab-Tension screen may suffer from RF interference
from other home electronics.
Although radio interference affecting other household electronics is unlikely, the following steps can be taken
should RF interference occur.
.
✓
Reorient or relocate the receiving antenna on the device that may be casing the interference.
✓
Increase the distance between the screen and the interfering device’s receiver.
✓
Connect the projection screen to another power source apart from the interfering device.
Pre-Installation
1.
Carefully unpack the screen.
2.
Always handle the screen upright on a level, clean surface.
3.
Keep the screen out of contact with foreign particles such as dust, sawdust, and/or liquids.
NOTE
Wall screws included with this product are complementary and may not be adequate for all mounting surfaces.
Consult with a professional installer or hardware store for proper mounting screws and anchors.
Regardless of the mounting method, the screen should be securely supported so that the vibration or pulling on the
viewing surface will not cause the casing to become loose or fall. Included mounting screws are complimentary
and may not be appropriate for all mounting surfaces. Use appropriate anchors to safely secure the screen to the
mounting surface or consult with a professional installer.
Hardware and Parts List
Please make sure all parts listed below are included before proceeding with the installation.
A. Bracket x 2
B. M5x11mm
screw x 4
C. M5 Nut x 4
D. M5x50 screw &
Dry-wall anchor x 6
E. Bubble Level