051319-BR
2
Instructions for Proper Care & Use
◆
Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the points
below to prevent that from occurring:
1. Do not touch the projection surface with your hands
2. Do not write or draw on the projection surface
3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen material.
4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.
5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.
◆
After using the screen, disassemble it and store it in the carrying bag provided.
◆
To avoid product damage or physical injury, this product should be used by adults only.
Setting up the Tripod Lite Projection Screen
A.
Tripod Stand set up
1
.
Place the
tripod stand
in an upright position with the legs slightly above the ground.
2. Open the support legs and set upon the floor. Legs will lock in place.
3. Release the locking lever and extend the telescopic vertical support to its desired height setting.
B.
Attaching the Projection Screen Material
4. Unroll the
screen material
on a clean surface. Attach by hooking the
screen handle to the
Support Hook.
5. Turn the locking levers counter-clockwise to adjust the telescopic
height setting. Turn the locking lever clockwise to lock the vertical
support at its desired height.
6. Screen is now set and ready for use.
What’s included?
Screen Material (rolled)
Tripod Stand
Carrying bag
