11092020JA
U-00199
5
How to attach the springs
Step 9:
Hook one end of the spring and secure inside the groove of the frame, use the
spring hook (i)
to attach
the spring to the hole located on the screen material’s outer edge in the following order.
First connect on four corners, steps 1-4. make
sure all four corners are fixed before proceeding
with next spring.
Continue to attach the remaining springs to the material in steps 5-12 in the follow order.
Step 10
: Insert the Center Support Bar (o) into the upper top groove on the back of the frame with the bottom end
near the approximate center point of the frame and rotate it in at an angle so that both ends of the bar are in
alignment with the groove.
i.
h.
Diagonal Models 150” and below use 1 x Center Support Bar
o.
Spring must hook both
overlapping short rods.
1
2
4
3
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
5
6
7
8
9
10
11
12
