02092015 EA
www.elitescreens.com/kestrelhome
3
SCREEN OPERATION
Setup:
Remove the controls and wiring from the compartment on the left side of the
Kestrel
Home
Floor Electric Screen as shown in the pictures below.
Connect the screen to the power supply a n d s w i t c h t h e p o w e r b u t t o n o n . N o w i t i s
r e a d y f o r u s e .
Power:
About the Control System:
1. Wireless
5-12V Trigger:
A
wireless RF 5-12 volt trigger (Part #: ZSP-TR02) is included
with your new Elite Kestrel Home. This trigger allows you to synchronize the screen
’s rise and
drop with the projectors power cycle. The screen rises when the projector powers up and
retracts when the projector powers down. To enable this feature, connect one end the 5-12V
trigger cable to your projector’s trigger output port and the other end to the RF remote
control(see diagram below). The trigger feature will not work without if the projector does not
have a 5-12V output port. If you encounter any issues
please visit the “Downloads” section for
the Kestrel Home Series at:
www.elitescreens.com/kestrelhome
2. RF (Radio Frequency):
The Kestrel Series screen includes an RF remote control. The
standard RF remote is the best option to use as it
does not
require a direct line of sight.
ON OFF
