05/17/16-DR
www.elitescreens.com
4
Step 5.
Connect the elbow joints to top and bottom sections of the vertical frame. Once inserted,
connect the vertical sections to the horizontal
frame sections. Make sure all the holes are in alignment
and the frames pieces are flush (no gaps). They should form perfect right angles.
Step 6.
Secure the elbow joints by fastening them with 4 M4x6 screws (4 at each corner). Do no tighten
completely until all frame pieces are assembled correctly.
Step 7.
Carefully unroll the screen material from the roller from one side of the frame to the other side as shown
below.
Step 8.
With one end of the spring and secure inside the groove of the frame, hook the spring to the hole located
on the screen material’s outer edge. Use the pull hook when necessary. Attach the four corners first (1). After
those are secure, connect the vertical portions of the material, begin in the center and move towards the corners
(2). Lastly, connect the horizontal sections of the material by connecting the center of the material and make your
way towards the corners (3).
Front Side
