Rev 1.3
Examples Of Installation & End Cap Dimensions Page
Cealing Chain
Mounting
Cealing Flush
Mounting
Flush wall
Mounting
b
d
a
Cealing Dry
Wall
c
1.
Start by locating the studs on
your wall. Make sure to measure
the keyholes located on the back
end of the screens end caps.
2.
Mark the area where screw hole
will be inserted for the L”
bracket or screen. The L” bracket
is sold sepperatly.
3.
Setup (a) is a well example for
mounting the screen using the L:
bracket.
4.
Setup (b) is another example for
mounting the Screen flushing it
against the wall.
5.
Setup (c) is a hard task to
achieve and you may need to
consult with a proper installer/
contractor. Additional hardware
may be required. If flush mounted
as shown on example (c) it is wise
to have about 2” of space away
from the housing/case.
6.
Setup (d) is an example of cealing
mount/chain hanging. By using a
proper chain and hooks it can be
sustained by the cealing. Locate
studs on the cealing before
mounting for proper support.
L” Bracket
Mounting
Note:
Regardless of mounting method, screen should be securely supported so that vibration on the viewing surface
will not cause case to work loose or fall. Installer must insure that fasteners used are of adequate strength and
suitable for the mounting surface chosen
.
