V021417
www.elitescreens.com
4
Installation:
1.
Measure the distance between the two hooks
(Fig. 6)
which are located on the top
support bar and install two screws or nails in the area where the screen will be
installed. Once the nails or screws are in place, hang the screen by the wall hooks and
carefully roll the screen down.
2.
Next, measure distance of the top hook and bottom hook (
Fig. 7
) to determine the
height required for the bottom nail or screw installation. Once the bottom nails/screw
supports are in place hang the bottom hooks to secure the DIY Wall 2 screen.
Tip: Pull the hooks on the bottom weight bar as far as they allow prior to installing the
screw. This will allow the screen material to properly stretch out for a flat and taut
installation.
Fig. 6
Fig. 7
