3
Assembly
1.
Insert both
Elbow Joints
(J) into each
Horizontal Curved Frame
(N) and join all four frame parts
together as shown below.
2.
After making sure that all four corners join at right angles to form a perfect rectangle, fasten the
four angles together by using x8
M5 screws
(E).
3.
Lay out the
Screen Material
(O) and
Tension Rods
(L) on a clean and dry surface. Then, gently
roll out the screen material on the back of the fixed frame.
4.
Insert the screen
Tension Rods
(L) through the sleeves according to their corresponding lengths on
each edge of the screen as seen below.
Vertical Upright Fame
Horizontal Curved Frame
Black Backing of the screen material
Minimal gap is normal here
