Components List
1. Frame Part
4 pcs. (2 long + 2 short)
2. Tension Rod
4 pcs. (2 long rods
+ 2 short rods)
3. Screen
1 pc.
4. Joint
4 pcs.
5. Fix Plate
30~50 pcs.
6. Wall bracket 4 pcs.
7. Screw
24 pcs.
8. Center Support 1 pc.
9. Manual
1 pc.
Use a stud finder to locate the wall studs nearest the
center of your desired screen location. Mount the
sliding wall brackets firmly into the wood using the
wood screws from the installation kit included with
the SilverFrame Screen. Hang the screen onto the
wall as illustrated in (fig. 8). The frame will slide on
the wall brackets so that it can be perfectly centered.
CAUTION
Please follow these instructions carefully to
ensure proper maintenance and safety with
your EZ-Frame Screen
1. When hanging the screen up, please make sure that no other objects such as power switches, outlets, furniture, ladders,
windows, etc. occupy the space designated for your Fixed-Frame screen.
2. Regardless if the screen is hung on or installed into the wall, make sure that the proper mounting anchors are used and
that the weight is supported appropriately by a strong and structurally sound surface just as any large and heavy picture
frame should. (Please consult a home improvements specialist for the best advice on installation)
3. Frame parts are made of high quality velour-surfaced aluminum and should be handled with care.
4. When not in use, cover over the screen with a furniture sheet to protect it from dirt, grime, paint or any other
impurities.
5. When cleaning, use a damp soft cloth with warm water to remove any marks on the frame or screen surface.
6. Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
7. In order to avoid damaging the screen, avoid touching it directly with your fingers, tools or any other sharp or abrasive
objects.
8. Spare Parts should be placed out of reach for small children's in accordance with household safety guidelines.
