Rev.02142022KP
5
1
3
4
B.
Collapsing the screen:
Follow the steps below and Fig. 4.
1.
Push/press the
Screen Height Adjustment Lock/Release
to unlock and
slowly slide the handle all the way up to slowly retract the screen into its case.
2.
Unhook the screen material from the
Top Hook
and slowly retract the
screen back into the case.
3.
Once the material is in its case,
Push/press the
Screen Height
Adjustment Lock/Release
to unlock and slowly slide the handle all the way
down to bring down the position of the screen’s case.
4.
Hold the
Extension Bar
and Push/press the
Vertical Locking tab
to
unlock and release the position of the extension bar. Bring the extension bar
all the way down.
5.
Turn the screen’s case
vertically clockwise
and insert the
Top Hook’s
bottom pin to lock into the screen’s end cap hole.
6.
Close the tripod legs by pushing them in.
Note:
•
To ensure the screen is stable, extend the tripod’s legs as much as possible.
•
Do not fold the screen or allow any sharp objects to touch the screen’s surface.
•
Clean the screen surface often when needed.
•
Careful use will extend the lifetime of this product
.
For more information, technical support or your local EliteProjector contact,
please visit
Fig. 4
2
Note: It is very important to remember to hold the extension bar first and then
unlock the adjustment tab to prevent the extension bar from slamming and
causing injury or damaging the screen.
