Rev.02142022KP
1
EliteProjector Screens
Light-On CLR® 3 Series
Tripod Tab-Tension model # TT55V-CLR3
Indoor Ceiling Ambient Light Rejecting Portable Screen
For tabletop mounted ultra/short-throw projectors
U
ser’s Guide – Z Type
_____________________________________________________________________________________________
Thank you for choosing the
Light-On CLR
®
3
Tripod Tab-Tension model. This product is a portable tripod projection
screen with ceiling ambient light rejecting technology for portable projector presentations on the go.
The screen material included is our
CLR
® 3
, which is an optical lens front projection material precisely formulated for
environments with minimal control over room lighting. It was designed to filter and absorb overhead light while
directing tabletop mounted projectors. It best for family rooms, educational facilities, conference rooms or any
applications in which incident light is a factor.
Screen maintenance
Dust, dirt, and scratches on the projection screen surface will affect the quality and performance of the projection
image. Follow the instructions below to properly maintain the screen.
1) The screen surface has a horizontal linear structure.
DO NOT
wipe the screen up and down or in a circular
motion.
Wipe gently from left to right only
.
2) Clean the dust on the screen surface with a soft brush or microfiber cloth. A rough/coarse towel or cloth may
damage the screen’s surface.
3) Gently wipe the screen with a lightly moistened white lint free cloth with water or with a neutral detergent
(1mL/0.33 oz) mixed with water (1000 mL/33.8 oz).
4) Avoid putting pressure on the screen material when wiping the screen. If dust or other debris is on the surface,
we recommend using an air sprayer to blow them away.
Notes: The following precautions should always be followed to avoid damaging the material, which is not covered
under warranty.
•
Don’t touch the screen material to avoid leaving fingerprints.
•
Use gloves when handling the material.
•
Don’t scratch the material, as it will leave permanent markings on the screen’s surface.
•
Don’t point to the screen material with a fingertip or other sharp objects to prevent damage to the material.
•
Don’t use acetone, benzene, alcohol and any other organic solvents to clean the screen material. Using such
chemicals will permanently damage the screen.
CAUTION!
THE PROJECTION FABRIC IS A DELICATE OPTICAL/LENTICULAR SCREEN MATERIAL AND SHOULD NOT BE
FOLDED, BENT, OR CREASED. ALWAYS MAINTAIN SCREEN MATERIAL FLAT AND TAUT DURING SETUP AND
DISASSEMBLY. IT IS VERY IMPORTANT ALL INSTRUCTIONS ARE FOLLOWED TO AVOID DAMAGING THE
MATERIAL. ANY DAMAGES RESULTING FROM NEGLIGANCE OR MISHANDLING WILL VOID YOUR WARRANTY.
