Step 3 - 4
Step 5
Step # 5
Attach
Part E
Back Support Legs to the back section using ¾” male Flat Allen bolts
from the Underside of the frame and 5/16” female Insert bolts from the top of the frame.
To insure proper support and long lasting enjoyment of your futon
periodically retighten bolts. Also, it is recommend that you flip your
mattress periodically to ensure even w ear.
Congratulations your futon is now assembled! To operate your new E-frame simply set the back
support legs into the rear channels on the Square tube legs
Part #B
for sofa position. In order to
make into bed position lift the back support legs from the rear channels (sometimes the back
support legs fit snug into the channels) and pull the back section away from the rest of the frame.
Make sure to swivel the center curved tube support legs
Part C & D
toward the rear of the frame
for maximum support.
Lay gripper on the top of the seat section to keep the mattress from slipping. The mattress works
best with slip cover if it is double folded on the seat.
Sofa Position
Sofa Position with Slipcover
Step #3
Attach
Part C & D
the two Curved Supporting Legs tubes together using the small ½” Rounded
Allen Bolts.
Do not tighten completely until Step 4 is completed.
Step #4
Attach the Curved Support Legs to the transmission pieces using 1 ½” Rounded Allen Bolts from
the outside and locking nuts on the inside. Do not tighten too snug or firm this section must be
able to swivel. Now tighten
Part C & D
together. Refer to
Step 4
Style # 37-3504-050
Eframe.cdr
