JA07092020
U
-00158
4
Step 5
: Secure the elbow joints by fastening them with
M4x7 screws (
g)
, 4 at each corner.
Center Support Bar
Step 6:
Insert the
Center Support Bar (o)
into the upper top groove on the back of the frame with the bottom end
near the approximate center point of the frame and rotate it in at an angle so that both ends of the bar are in
alignment with the groove.
Screen Material
Step 7:
Put on the
white gloves
(
p
) and carefully unroll the screen material on a clean surface from the roller to the
other side as shown below. The back side of the screen material should be placed upwards.
2. Hardware Parts List
a.
b.
c.
d.
e.
f.
g.
h.
i
j.
k.
l.
m.
Back side
Back Side
g.
Front
o