09242019JA
2
www.eliteproav.com
WARNING
Individual modifications to this product are prohibited and will void the manufacturer’s warranty. Please
contact the Elite ProAV Customer Service Team with any questions.
NOTE
:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
The product settings are designed to provide reasonable protection against any radio interference within a
residential installation. If properly installed, the Kestrel Tab-Tension CLR screen may suffer from RF
interference from other home electronics.
Although radio interference affecting other household electronics is unlikely, the following steps can be taken
should RF interference occur.
.
✓
Reorient or relocate the receiving antenna on the device that may be casing the interference.
✓
Increase the distance between the screen and the interfering device’s receiver.
✓
Connect the projection screen to another power source apart from the interfering device.
SCREEN MAINTAINANCE
Dust, dirt and scratches on the projection screen surface will affect the quality and performance of the
projection image. For optimal results we advise to pay attention to the following instructions.
1) The screen surface has a horizontal structure.
DO NOT
wipe the screen up and down or in a circular motion.
Wipe very gently when needed from left to right only
.
2) Please clean the dust on the screen surface with a soft brush or microfiber cloth (rough towel or cloth may
damage the screen’s surface).
3) Gently wipe the screen with a lightly moistened microfiber cloth with mild soap diluted in water.
Notes
：
The following precautions should be followed at all times to avoid damaging the material, which is
not covered under warranty.
▪
Don’t
touch
the screen material to avoid leaving fingerprints.
Use gloves when handling the material
.
▪
Don’t
scratch
the material, as it will leave permanent markings on the screen’s surface.
▪
Don’t
point
to the screen material with a fingertip or other sharp objects to prevent damage to the
material.
▪
Don’t use acetone, benzene, alcohol and any other organic solvents to clean the screen material. Using
such chemicals will permanently damage the screen.
