6/29/17-JA
www.eliteproav.com
5
Step 10:
With one end of the spring and secure inside the groove of the frame, use the
spring hook (d)
to attach
the spring to the hole located on the screen material’s outer edge in the following order.
Attach the four corners first (1). After those are secure, connect the vertical portions of the material, begin in the
center and move towards the corners (2). Lastly, connect the horizontal sections of the material by connecting
the center of the material and make your way towards the corners (3).
Note (after all springs have been attached):
Correct material installation
–Corners of the screen material are properly wrapped around the corner edges of
the frame and material is evenly tensioned and flat, creating a nicely taut surface.
Incorrect material installation
–The corners of the screen material are not properly wrapped along the edge of
the frame leaving the material with unbalanced tension and an uneven finish. To correct, detach springs from
material at the corner(s) where material does not lie flat along the edge of the frame, reposition the material so
that it lies flat and wraps along the edge of the frame, and reattach springs to the material.
Back Side
1
1
1
1
2
3
2
3
