3
Rev. 042417 -DR
www.eliteproav.com
3-way Wall switch
CineTension 2 Series| Controls and Accessories
A. IR Remote
B. RF Remote
C. Wall switch control box
D. 5-12 volt trigger cable
E. IR extended “eye” receiver
F. Wireless 5-12v (3.5 mm)
mono trigger cable
G. AAA batteries
H. Bubble leveler
Screen operation
Electric Current
: Depending upon region, your EliteProAV™ screen will operate on 100v, 110v, or
220v voltage.
1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power
outlet.
2. Once the screen has power, you’ll be able to control it using any of the 6 methods described below.
6 ways to control your CineTension 2
IR “Eye” Receiver
1.
IR remote control
(
Item A, Fig 1
): The Infrared functions by direct line
of sight contact with a beam range of 30 feet. Aim the IR remote at the
circular window located on the left side of the screen
2. IR “Eye” Receiver
(
Item E, Fig 2
): The IR “Eye” Receiver plugs
directly into the screen’s RJ-45 input to present a low profile line-of-sight
control option for your IR remote control even in a recessed ceiling
installation.
3. RF Remote Control
(
Item B
): The radio waves eliminate the need for a
direct line of sight with a range of 100 feet.
4. 3-Way Wall Switch
(
Item C, Fig 3
): The 3-way wall switch is a wall
mount control box with an up/stop/down button and plugs directly into the
screen’s RJ-45 input.
UP
STOP
DOWN
Fig.1
IR/RF remote
Fig.2
Fig.3
