Rev.082416-MZ
6.
Fasten the remainder of the fix plates in the empty locations in the red markings to complete attaching the screen
material. (Fig.13)
BLACK BACKING ATTACHMENT
The purpose of the black backing material is to block out any light penetration that may
behind the screen, which can cause distortion to the projected image.
CENTER SUPPORT BAR
1.
Insert the
support joiner
into each side of the
support joiner
(Fig. 14)
The black backing is held in place by the Velcro that is on the fix plates.
Black backing
5
Fasten the remainder of the fix plates in the empty locations in the red markings to complete attaching the screen
BLACK BACKING ATTACHMENT
The purpose of the black backing material is to block out any light penetration that may reflect off of anything mounted
cause distortion to the projected image.
into each side of the center support bar to complete assembly.
(Fig.13)
Interval markings reveal the best points for inserting the fix plates
(Fig. 14). The prongs on the fix plates insert to the lip on the back of the
frame creating a friction hold that will firmly keep the material and
black backing in place (Fig. 15-16).After the material has been
the backing will lay over the back of the white (Acoustic) material and
then be held in place by the Velcro on the fix plates(Fig 1
(Fig. 16)
(Fig. 15)
The black backing is held in place by the Velcro that is on the fix plates.
Fix plates secure the Acoustic material and the black backing behind it.
Center support bar
www.EPVscreens.com
Fasten the remainder of the fix plates in the empty locations in the red markings to complete attaching the screen
reflect off of anything mounted
Interval markings reveal the best points for inserting the fix plates
to the lip on the back of the
frame creating a friction hold that will firmly keep the material and
).After the material has been installed,
over the back of the white (Acoustic) material and
eld in place by the Velcro on the fix plates(Fig 17).
(Fig. 17)
the Acoustic material and the black backing behind it.