www.valuehobby.com/8mm-epp-yak55-V2.html
11
Step4. Insert the guides into the vertical fuselage
for the rudder servo pushrod.
Step5. Slide two pushrods into the guides.
Step6. Attach the z-bend to the elevator horn.
Step7. Slide a shrink tubing to the pushrod wire.
Use a soldering iron to shrink the tubing to connect
the pushrod and the control horn.
Step8. With the elevator control surface centered,
cut the excess pushrod.
Step9. Attach the z-bend to the servo arm. With
the elevator control surface centered, use a
soldering iron to shrink the tubing to connect the
pushrod and the servo.
